24-Hours To Improve Ghost Ii Immobiliser

Ghost II Immobiliser

Protect your vehicle from key-cloning, hacking, and vehicle theft. It is completely silent and unnoticeable by a would-be car thief, as it does not use LED indicators or key-fobs to alert thieves of its presence.

It is also possible to temporarily disabled with Transport Mode for situations such as transporting vehicles or when your vehicle is being serviced.

Simple PIN code Change Process

Ghost is a groundbreaking next-generation security device that can secure your vehicle without cutting wires or installing an aftermarket alarm key fobs for immobilisers or alarms. It connects directly to the vehicle's CAN Data Network. A personalised PIN code can be programmed using the factory buttons located on the dashboard and steering wheel. This code prevents the engine from starting, and is inaccessible to any RF scanning technology or code-grabbing technology used today.

The system has an emergency pin code override in the event that a user forgets his/her code or the programming key is lost. The system also has the option of a service/valet mode which lets the vehicle to be started temporarily and driven without requiring an authorization code. This makes it ideal for transportation or servicing.

The UK automotive aftermarket, while thriving, is not immune to theft. Thieves can easily bypass most traditional deterrents, like locking your steering wheel and wheels, by simply hacking into the OBD port in your vehicle. This can be done with a laptop, USB cable and an inexpensive OBD scanner that can be bought online for PS50.

It is important to protect your vehicle with an immobiliser Ghost II to avoid theft. It's a small device that can help prevent vehicle theft. Once you have your PIN number it's simple to use. The device is contained inside of a tiny box and can be installed inside the wiring harness of your vehicle. It is also weatherproof and can be put anywhere in your car which makes it difficult for a thief to find. The device is also easy to install and comes with a warranty.

Small, weatherproof device

The device is connected to the CAN data network in your vehicle without cutting any cables and is quiet. It can be programmed using a an individual PIN code by using the buttons on the steering wheel and dashboard to prevent theft. It also comes with an inbuilt GPS tracker. It can be activated through an app on your phone and is recommended by a variety of insurance companies for cars. It is weatherproof and can be concealed in the car and is nearly impossible for thieves to track it down.

Unlike traditional systems which are monitored by criminals, ghost II operates in a quiet manner and requires between 4 and 21 presses on the vehicle's buttons. The sequence can be determined by the owner of the vehicle to their preference, and the sequence cannot be re-enforced. There is a mobile phone App that can be used to dearm the system, and in the event that you decide to sell your vehicle, there is a master reset code that resets the immobiliser on the CAN bus.

Modern thieves can use diagnostics to detect circuit breakages on modern cars, but the Ghost does not contain any circuit cuts. Therefore, it is a truly secure and foolproof system that can be fitted in vehicles by our experienced team of CANbus immobiliser fitters.

Unlike other CANbus immobilisers, which may require a key fob for installation, the Ghost is compatible with all kinds of vehicles. The technology is so advanced, it is able to protect against various security threats including signal relay attacks as well as ECU switching. It is compatible with many smartphones and can issue warnings to owners in the event that their vehicle is driven without authorization.

Every vehicle is tested

Ghost is an innovative immobiliser system that shields your vehicle from key cloning, hacking, and even key theft like no else on the market today. A criminal would need to physically remove the device from your car and then transport it to a trailer and reinstall it on a different vehicle to steal the Ghost secured vehicle. It also shields against the use of wheel locks or jumper cables, as well as universal keys.

This incredibly easy to install device operates completely in a quiet manner and connects to the vehicles CAN data circuit, which allows it to communicate directly with the ECU (Engine Control Unit). It is sealed and so small that it can be tucked in the harness of your vehicle and installed anywhere making it nearly impossible for thieves to spot.

Once installed, it prevents your vehicle from starting until the specific disarming sequence is entered by pressing the buttons on the steering wheel, door panels, or centre console. It can be set up to 20 digits and allows you to choose the level of security you wish to be. It is also possible to activate a Service/Valet mode that lets you temporarily start and drive your vehicle without having to enter your PIN code.

Because it uses the CAN data circuit, there are no radio frequency signals, like an immobiliser relay that is traditional This means that a burglar can't listen to the relay in order to try and decipher what PIN code is being entered. It is not equipped with circuit breakers and is not able to be detected by diagnostic tools, RF scanning or code-grabbing technology.

The Key Lab  is proud to be an approved installer of this wonderful product. We are incredibly satisfied with its performance as well as the peace of mind it gives our customers. It's a fantastic solution to protect your joy and pride in these troubled times.

Emergency Pin Code Override

The Ghost immobiliser stops your car from starting without the correct PIN code. It is weatherproof and tamper-proof. It is concealed within your vehicles wiring harness and utilizes the buttons on your steering wheel or dashboard to generate an individual code sequence that needs to be entered in order to start your vehicle. Unlike Thatcham devices, it doesn't use LED indications and is connected to your vehicle using the CAN system. This makes it inaccessible to professional thieves using accessible diagnostic tools that can detect alarm/immobiliser circuits within modern vehicles.

If you'd like to temporarily disable your Ghost immobiliser, it can be activated by entering an emergency code to override the app on your smartphone. This allows you to lend your car to a family member, friend or valet without sharing your pin. It's ideal for situations such as maintenance or when you have to leave your vehicle at a valet or garage.

Ghost can also be utilized with a driver fob, which allows you the option of being able to start your vehicle using either your key or the app. This is ideal for parents with children who are young and want to drive the vehicle or you are unable to enter your pin number quickly or would like to utilize the vehicle in an emergency, such as an accident.

It's not a surprise that the Ghost immobiliser, with its simple PIN-change process, user friendly interface, and a myriad of safety features, is recommended by a variety of insurance companies. It is also backed by a security warranty. Its sleek, compact and seamless integration into your vehicle's existing systems makes it an ideal option for vintage or high-performance cars.

Service/Valet Mode

The Ghost is an immobiliser that can prevent theft of vehicles by blocking communication between your key and the ECU - meaning that the engine cannot be started without entering a unique PIN code. It's also hidden within the wiring allowing it to go unnoticed and it does not use LED indicators that can give away its presence. This is a great option when you have to hand over your vehicle to valet parking or a mechanic. To enable valet mode, simply enter the code given to you by your engineer upon the completion of installation - this will enable them to start your car without the need to enter the sequence to disarm. To exit valet mode simply return your car to normal operation and the code will automatically change back to your normal pin.

Ghost is designed to integrate with your car's CAN bus system, unlike other aftermarket security products that rely on buttons or key-fobs. This gives it unparalleled protection against modern theft techniques such as key cloning and hacking.

Once installed, your engineer will guide you on how to arm, disarm and valet mode your vehicle. All of this can be done via your smartphone app. Your engineer will generate a unique pin that is easy to remember, but mathematically inaccessible to thieves. If you forget it, don't worry as every installation comes with an Emergency PIN Code Override to restore your vehicle to working order.

Our installers have been fully trained and certified to install your Ghost correctly. Installations are completed on the premises of the customer. We also provide a walk-through on how to use the device as well as a mobile application. After your Ghost is installed, we ensure its functionality for life.